Analog indicators

This bronze and stainless steel unit was specially designed so you can have a good view of the designated rudder position signal from all areas within the wheelhouse. Equipped with a manual dimmer for the background illumination, the ...

Assemble an electrical monitoring system using these analog, panel mount meters. Meters are available with 2-1/2″ and 3-1/2″ face sizes. Easy to read graphics with unit divisions give precise readouts at a glance. ...

LCD on Tachometer and Speedo displays all available data and alarms Soft-function tactile pushkeys for easy navigation CANbus driven Tachometer Speedo and all 2” gauges receive data from Tachometers IP67 waterproof Plug ...

Power supply: 9 V - 32 V

Bezel Black / White / Stainless Steel Mounting Dimension φ52mm

... Ideal for boaters who only require key data. Don’t need expensive over complicated systems. Moving Card Compass Indicator Shows heading on a moving compass card Clear ‘at a glance’ analogue display Intuitive, ...

Power supply: 12 V

Dial gauge showing the fuel level. Available in 12 V.

... NT920RTU). All Indicator heads (NT920RAI) are electrically and mechanically identical (no master / slave distinction) which provides complete interchangeability and straightforward system expansion. Each Indicator ...

Provides Colour Display for all the following devices on an NMEA2000® network: Sunlight readable dimmable display using our BlackGlass™ technology Two direct J1939 interfaces and one NMEA2000© interface Remote button panel providing: ...

Power supply: 12 V - 40 V
Operating temperature: -10 °C - 70 °C

Classic design including domed glass front, but with the latest mechanical and electronic attributes, including user serviceable desiccant module to keep unit crystal clear. A full range of functions is available and a wide range of interfacing. A+T ...

Power supply: 110, 220, 24 V
Operating temperature: -15 °C - 55 °C

... install and maintain, AD80 fully complies with the regulations of IMO and the standard IEC61162 sentences. Features ▶ Analog and digital dual display ▶ Multidirectional rod link ▶ Fast plug-in waterproof connector ▶ ...

A range of rudder indicators, standard and customized The new range has been designed for ships use. Typical applications for these indicators are the display of thrust direction and rudder angle for ...

An ammeter indicates the current flow through the battery charging system. A "zero center" ammeter, during chargine, shows a (+) positive reading indicating the current is flowing to the battery (charge). A (-) negative reading indicates ...

... display real-time performance data and compiles the information into one gauge- the Master Tach. This tachometer features an analog RPM readout with a built-in LCD screen that displays all the information your engines ...

Make life easier with our economical steering aid and rudder positioning device. Each unit comes with all necessary components needed, along with calibration box and sending unit. Constant monitoring of rudder angle from 0 to 45 degrees Repeater ...

Simple 4-wire connection from shunt Meter senses and powers from shunt connection Includes DC shunt Backlit meter face (separate 12 or 24V DC backlight connections)

Guage kit for CMC Power Lift and T-H Hydro-Jacker hydraulic plates

Description The PowerView Analog Gages (PVA) are a series of intelligent gages designed to display easy-to-read information transmitted by the PowerView. The PVA gages communicate with the PowerView via a single RS485 ...

- Quiet, steady and resistant rudder angle indicator - Material: ABS polymer and methyl methacrylate - Communication protocol: RS-422 (2 wires) - Includes 2 tapered scales: Port: from 0º to 45º (red colour) Starboard: ...

Tek-Tanks electrical water senders and gauges are fitted as original equipment by most major UK boat builders. Made from a stainless steel head assembly with a stainless steel tube, they are reliable and easy to install. A float, holding ...

Digital rudderangle indicator CD100 Digital rudder indicator with colour display. Showing angle both analog and digital. There is no mechanical parts which means a very high schock ...

... and setup time. Our instruments communicate with the engine ECU for the most accurate information and error codes.Multiple analog inputs and warning lights reduce cost while still providing the customer with everything ...

Power supply: 24 V
Diameter: 205 mm
Operating temperature: -25 °C - 55 °C

Current signal transmission type Including: one rudder indicator (45C3-mA), one rudder transmitter (FD-IIE), one Junction box (FD-IIT). Parameter - 2. Indicator: Measuring range: ± ...