Boat fenders

Prevent structural damage to floating vessels Fully tested for optimal performance Maintenance-free Thor H (Hull) rubber fenders are efficient at absorbing and dampening impact energy. They can be installed onto the hulls of large ...

Thor SBF (Small Boat Fender) are frequently chosen for rescue boats and coastguard vessels. They are manufactured from high energy absorbing, resilient, closed-cell polyethylene foam, encapsulated within a high-performance polyurethane ...

Trelleborg’s Extruded Fenders are simple rubber marine fender profiles with a robust design. Extruded fenders are usually attached with bolts to the structure. They can be made in virtually any length then cut and drilled to suit ...

XR Catapult bow roller system for XR anchors. Designed for boat with vertical bow design. Push the anchor free from the bow when dropping the anchor, but still make you park the anchor close to the bow. No extra electrical components ...

Fender hooks for pulpit tubes and custom railings. Made in high polish stainless steel 316L. Felts on the inside for tube and railing protection. Easy line adjustment. For tube to 25mm - 32mm - 38mm Railing 75mm - 100mm Also custom sizes.

Sunseeker Fender hooks for pulpit tubes and custom railings. Made in high polish stainless steel 316L. Felts on the inside for tube and railing protection. Can be made with custom logo / yacht name. Easy line adjustment. Made in Europe

Diameter: 30 cm - 244 cm
Length: 74 cm - 457 cm

Manufactured in Europe, from a military grade, high-tensile Polyester laminate, DEFENDA provides unbeatable strength and abrasion resistance. A low profile valve provides maximum inflation and deflation speeds, whilst maintaining an ...

Length: 3, 2, 1 m

A lightweight, foldable alternative to traditional wooden fender boards, the DEFENDA inflatable FENDABOARD is designed to sit outside of normal fenders in harsh berthing situations. The body of the fender is made from drop-stitch fabric, ...

Diameter: 71 cm - 180 cm

Manufactured in Europe, from a military grade, high-tensile Polyester laminate, DEFENDA provides unbeatable strength and abrasion resistance. A low profile valve provides maximum inflation and deflation speeds, whilst maintaining an ...

Reinforced buoy-fender that assures maximum hold in the most extrem weather conditions.

Diameter: 22 cm
Length: 60 cm

Protect your boat with our innovative Dock Type L Fender, made of injected polyethylene foam (EVA). This exceptional product combines superior quality, high absorption capacity, water resistance, and easy maintenance. The L-shaped design ...

Diameter: 350 mm
Length: 1,000 mm

PVC pneumatic fender designed for large vessels, with a diameter of 350 mm and a length of 1000 mm. Constructed with material resistant to saltwater and weather conditions, it features inflatable internal chambers to absorb impacts. Ideal ...

In order to provide maximum protection while at a floating or stationary dock or rafted, DOOWIN designed inflatable boat fenders are for the yacht or boat. The customer can inflate the inflatable PVC boat fenders using a standard foot ...

Inflatable yacht fender is a kind of marine supply that play the role of mooring buffer and protecƟ on for yachts. In recent years, with the development of the yacht industry, this kind of fender is widely used in boats, speedboats, marinas, ...

Diameter: 1 m - 5 m
Length: 1 m - 12 m

Vessel foam fenders are extremely lightweight but very durable, and are typically bonded to the hulls of vessels but can also be mechanically fixed if required. We can build flexible fenders of any shape and size with different dampening ...

Length: 4 m

Height - 4,6 mm / 0.18'' Thickness - 1.5 mm / 0.05'' Width - 19 mm / 0.7'' Fender profiles with "C" section in AISI 316 stainless steel

Length: 4 m

Fender profiles with "C" section in AISI 316 stainless steel Height - 7 mm / 0.27'' Thickness - 1.5 mm / 0.05'' Width - 28 mm / 1.1''

Length: 4 m

Fender profiles with "C" section in AISI 316 stainless steel Height - 9 mm / 0.35'' Thickness - 1.5 mm / 0.05'' Width - 35 mm / 1.3''

Mantus Universal Stern Anchor Bracket This universal bracket allows you to store an anchor of any design on the rail in the cockpit or on the bow The rollers adjust and allow you to customize the bracket and anchor rail mount to snugly ...

Diameter: 300 mm - 1,000 mm
Length: 900, 1,200, 500, 1,500 mm

The ocean guard small standard duty (SSD) shipboard foam filled marine fenders are designed for quick and convenient use for naval and commerical vessels. Small standard duty shipboard foam filled marine fenders are constructed with ...

Length: 39 in

Profile conceived for fixed or floating structures made of concrete. It is perfect to protect the whole perimeter of the harbor, including slipways, bunkering areas and docks. The installation may be done in diagonal or horizontal position ...

Length: 29 in

Fender conceived for docks made of wood, aluminum and fingers. It covers perfectly the edge of the docks, ensuring the maximum protection of the boat during mooring. Designed to protect the bow and the stern, it can also be used as a ...

Length: 12 in

Fender conceived for applications on the corner of the fingers and floating docks, where maneuvers are trickier and dangerous. Its small size guarantees it only takes up the minimal amount of space, offering the maximum safety. n. ...

An innovative inflatable berth called Parking Boat that provides an instant berth in harbours Materials: made of fenders in rubberized fabric with high impact resistance, the product can be inflated in just a few minutes using elettrically ...

Inflatable fenders in rubberized fabric high resistance, reinforcements in rubber anti abrasion Heavy-duty and strong fenders can be customized depending on requirements of customers Standard size: diameter of "20-30-40-50" cm, ...

Length: 70 cm

The big difference remains the much lower weight and especially the ultra-small size when the product is deflated. This new fender is designed in a rectangular shape to be usable in the direction of the length or in the direction of the ...

Diameter: 25 cm
Length: 50 cm

Manufactured in high resistance pvc, basic version with stainless steel ring or version with high resistance 600 D polyester cover and webbing buckle. TIKI YACHTING innovation for 2022 Fender inflatable is as practical to use as a ...

Diameter: 20 cm
Length: 70 cm

The big difference remains the ultra-small footprint when the product is deflated. This new fender is designed in a cylindrical shape, the manufacturing process and materials are validated for marine use: resistance to shocks, UV, salt ...

Stern anchor outtrigger Stern anchor outtrigger. Stainless steel. A4.

Fix your fender correctly Our fender holders are quick and easy to install and can be adjusted in height. The line is only locked with a light push of a button and there is no more stress on the railing wire. You no longer need ...

Carbon made structure and Inflatable hypalone --> light, strong, easy to fit, easy to store! Structure Lenght and deck attachment height are customizable following yacht needs. Structure is carbon made with carbon pre-preg technology, ...

Length: 320, 400, 480, 500 cm

Used extensively across mooring and berthing operations, Glen offers a full range of rubber fender products including cell, cone, arch, leg and cylindrical fenders. To ensure they give a long life of performance in often demanding ...

Length: 200, 300, 400, 500 mm

1. Easy for installation and maintenance. 2. Reasonable reaction force with high energy absorption.

Diameter: 21, 30, 39, 46, 55 cm
Length: 28, 38, 50, 58, 71 cm

In late 1955, Polyform produced the world’s very first inflatable, all-plastic buoy in Aalesund, Norway. This was the first buoy in a series of buoys that was to become the POLYFORM® A-series, and they established the standard for buoy ...

Diameter: 13, 20, 15, 22, 29 cm
Length: 37, 47, 56, 66, 61 cm

Heavy duty fenders The Polyform F-series cylindrical fenders have set the standard for heavy duty fenders for over 60 years. Polyform's unique, in-house developed and patented POLYMATIQ® technology ensures supreme control over the fusion ...

Diameter: 23, 30, 35, 40 cm
Length: 47, 62, 75, 95 cm

Cylindrical, bullet-shaped POLYFORM® HL-buoys are specially designed to reduce drag when used under conditions with strong currents. The special oval design and ribs along the body contribute to a lower drag and for the buoy to skip ...

The Yokohama type pneumatic fender is a bumper with air as bumping media. Pneumatic Fenders are available in diameters ranging from 300 mm to 4,500 mm and lengths ranging from 500 mm to 9,000 mm, as well as special sizes. Pneumatic ...

Floating foam-filled fenders are manufactured from a high-quality foam covered by a tough Polyurethane skin. The performance can be modified by changing the grades of foam. The closed cell structure of the foams used means that these ...

Jerryborg Marine use heat laminated 100% closed cell foams for the fender core with a tough and thick nylon filament reinforced polyurethane skin, which have high compressive strengths, resulting in an ability to absorb a great deal of ...

Diameter: 220 mm
Length: 500 mm

Extremely resistant to compression and tensile strengh - thanks to its textile tubular design without seams or welding Customizable thanks to the choice of many colors and options The lightest in the world Easy to store - ...

Diameter: 190 mm
Length: 500 mm

The FENDERTEX® textile cylindrical fender is: Extremely resistant to compression and tensile strengh - thanks to its textile tubular design without seams or welding Customizable thanks to the choice of many colors and options ...

Diameter: 250 mm
Length: 700 mm

Extremely resistant to compression and tensile strengh - thanks to its textile tubular design without seams or welding Customizable thanks to the choice of many colors and options The lightest in the world Easy to store - ...