Other dock equipment

In the final design stages, it is important to equip the pontoons with all cast in material. For instance, adding a 5-ton cleat requires the fastenings, always done with stainless steel fittings, to be sufficiently reinforced to withstand ...

When water level variations are big, one may want secure the floating pontoons using piles driven into the seabed. This allows the pontoons to rise and sink with the water level. The floating breakwaters or pontoons are in these cases ...

This slide is constructed with rugged, durable, polyvinyl-coated steps and a one-piece polyethylene bed-way for a smooth ride. It can be installed with almost any EZ Dock where water depth is more than 5 feet.

Length: 61 in
Width: 52 in

Available in a small model with an 18” X 44” cutting board or a large model with a 4-foot fish table with optional add-ons, both stations are made of marine aluminum designed to withstand dockside weather conditions and marine use. This ...

This heavy-duty polyethylene bracket allows lateral position adjustment to attach to piles up to 18″ in diameter.

The Sport Dock Light is the ideal solution for creating stunning lighting scenes around your dock or boat lift. Based on our industry leading Sport Light range, the OceanLED Dock Light comes equipped with our most advanced signature optics, ...

The Sport Dock Light is the ideal solution for creating stunning lighting scenes around your dock or boat lift. Based on our industry leading Sport Light range, the OceanLED Dock Light comes equipped with our most advanced signature optics, ...

The Sport Dock Light is the ideal solution for creating stunning lighting scenes around your dock or boat lift. Based on our industry leading Sport Light range, the OceanLED Dock Light comes equipped with our most advanced signature optics, ...

Step light as an orientation light with pleasantly warm white High-Power LED . IP67, waterproof CHARACTERISTICS ■ stainless steel V4A (AISI316L) polished ■ Installation depht: 25 mm ■ Drill hole Ø 25 mm without panel jack, ...

Specs 2 kg Info: CROSS BOLLARD with holding fixture as lateral screw joint unit, galvanised

6,6 kg, 7,3 kg Info: 450000 – PILE CAGE for tubes up to 60mm Ø, holding fixture 2L, including screw joint units, galvanised 450001 – PILE CAGE for tubes up to 100mm Ø , holding fixture 2L, including screw joint units, galvanised Material: Galvanized ...

BATHING SLIDE complete, color red, body GRP, Frame Niro powder-coated, including 6 connecting bolts (blue/grey/sand/black) in wooden box 4700x 800x1350mm (LxWxH) SUITED FOR CALM WATER ONLY!! FOR CHILDREN’S USE ONLY!!

Fixed and mobile electrical terminals for the refill of your electric boats Dimensions(Size): 25 x 30 x 94 cms power supply on bornier 3P + N + T25 Base of board EEC Type straight IP44 2P+T 16A 230V protected by circuit breaker diff P+NC ...

Brass mooring eyes DimensionsM12 Brass mooring eyes. Finish .L Polished .C Chromed Hole diameter Ø 45 mm

Brass mooring eyes Dimensions40 x 30 mm Finish .L Polished .C Chromed Hole diameter Ø 25 mm

GENERAL FEATURES IP protection grade: IP68 Installation on: Hull Dimensions: Ø 130 mm Mounting: hole Ø 14 mm Fixing system: screws MATERIALS Body: stainless steel AISI 316L Interior: resin Diffuser: temperated glass Orientable: ...

After 35 years of experience we can offer the best rotomolded floats on the market. Different sizes to suit all applications. Up to 10 years warranty.

Combining aluminum pontoons with concrete floats allows you to get the best of each technology: the versatility of aluminum and the robustness and stability of concrete. Improve your marina at an affordable price.

Special rings Double rings, with shock absorbing fenders or special geometries adapted to projects requiring a customized design. In steel or aluminum depending on the type of pontoon. Aluminum ring Reinforced rings for aluminum ...

Breaking load: 11,800 kg
Length: 110 cm

The perfect solution in substitution to normal chains; clean, silent and light

Breaking load: 11,800 kg
Length: 170 cm

The perfect solution in substitution to normal chains; clean, silent and light

Breaking load: 15,000 kg
Length: 42 cm
Width: 8.5 cm

Boat weight: From 7ton to 9 ton Workload: 7000 kg / 15432 Ib Weight: 2.2 kg / 4.8 lb The entire range of high resistance mooring shock absorbers suitable for boats up to 40m is the result of years of research, tests and experience. Our ...

Voltage: 220 V - 400 V

The fixed bollard for the distribution of electricity, energy power, water, compressed air, data transmission and audio systems, model SIMPLY, is made entirely of AISI304 or AISI316L stainless steel and features an elegant design convex ...

The LightUnit illuminates a safety ladder at night, enhancing waterfront safety. In dark surroundings the LightUnit’s LEDs illuminate the rungs and side rails of the below ladder, providing visibility at night and clear direction to ...

The marinaLightUnit significantly increases waterfront safety as it illuminates safety ladders at night, making them easy to recognize from the waterside by a person in distress. A dedicated LED also ensures visibility form land. The ...

The purpose of the LightUnit for safety stations is to illuminate where safety equipment is located, making it easy to identify. It enhances the visibility of the available tools in the station during nighttime, guiding individuals towards ...

Wooden docks for swimming or boat mooring can be built based on our plastic floats. We do not supply any type of complete wood docks, only plastic floats. This product also fits for Walkable fingers. Our Walkable fingers are made ...

Pontoon float 1000L, filled with Polystyrene can be used in following floating structures: -Private docks -Swimming platforms -Pontoon platforms -Floating house platforms -Pumping station -Dredgers

Motor power: 1.2 kW - 100 kW
Voltage: 380, 415, 440 V
Bollard pull: 100 kg - 500,000 kg

Our single drum electric mooring winch with warping head safe pull load range is from 5-800KN which is 0.5t to 80t. Electric ship mooring winch incorporates essential components including an electric motor, gearbox, drum, warping end, ...

Motor power: 8 kW
Voltage: 220 V - 690 V
Bollard pull: 5,099 kg

Electric Power Management Reel, Hose pipe/cable winch is designed and installed on engineering ship, offshore and other special purpose ship. It is used for cable and hose pipe storage/ reeling. Main Technical Specifications: Suction ...

JIS F2001 bollard is made for ship use according to Japanese Industrial Standard. Its appearance is free from defects such as cracks, flaw detrimental to service or rust and of good finish. Its applicable ropes are wire rope, manila and ...

Our unsinkable floats meet all your flotation needs: for new docks or dock renovations, floating homes, leisure, industry applications, floating solar farms, etc. Our completely unsinkable floats are individually tested for watertightness, ...

Designed to absorb the shock load from wind gusts and waves Employs chafe protection to all areas exposed to rubbing Uses heavy duty 316L stainless steel shackles and thimbles Mantus Chain Hook/Grabber sized for your chain Carabiner ...

The Mantus Snubber Pendant is designed to attach the snubber line to chain/or line rode. It is made from UHMWPE fiber (Ultra high molecular weight polyethylene fiber) material known to be size for size as strong as steel. USE AS SNUBBER ...

Mantus Anchor Bungee is designed to lock in your anchor in place once under way. The product features 10 mm double braid line spliced into an elastic tensioner and a stainless steel chain hook to capture the chain.

Security is important, both to the marina operator and to the boaters themselves. In many situations limiting access to the docks is essential to providing a secure marina environment where boaters can relax knowing that their valuable ...

Our systems of shock absorbers for the anchorage of floating docks M2 / M3 provide the floating dock with the right degree of elasticity, enhancing considerably the characteristics of endurance and resistance of the anchorage systems ...

The design of this mooring spring combines the concept of simplicity and the easiness of installation. Light, safe and resistant, it employs only the 10% of its potential to absorb the bumps that the boat could be subject of during sea ...

Mooring spring designed to assure the maximum comfort during the permanence in the harbor. Nereide combines lightness, small size and high resistance, which enables it to absorb even the most violent jerks in a progressive and smooth ...

Voltage: 12 V
Bollard pull: 350 kg - 500 kg
Drum capacity: 5 m

The NorDav™ 907 Electric winch, 12V powerpack included. This is our standard offering on the electric winch setup. Its very sleek and well designed with the start stop switch optimum located at your fingertip. Additional its including ...

(1) The circular buoys of listed specifications are made of LLDPE UR644, which are with high impact strength and excellent resistance of temperature, corrosion and oxidation, and its service life under natural use conditions is 5 years ...

Potona Marine is pleased to have been announced as the successful Tenderer of the Sea Island Project of Hainan, China. This is a Phase I Project of both the #2 and #3 islands, which consists of 16 private docking berths and a public ...

(1)The outer shell of a dock float is made of linear low density polyethylene UR644, and processed by rotational molding with one-time completion. (2)The density of expanded polystyrene foam filled inside a dock float is not less than ...

Motion is detected the super bright LEDs light your dock. 12-watt solar panel with a 5-watt LED

3.36” x 1.68 x 7.73” 8.54 cm x 4.27 cm x 19.6 cm Light up your floating dock's edge at night. Insert the Solar Diamonds into open float section sockets. Then wait for the sun to go down to enjoy the glow. Two Lights per package Solar ...

In Black or White Sizes: 2", 3", 4", 6", 8", 10"or 12"

HNA Series Brass Socket Standard: DN89250 Protection Class: IP56 CZH101 (-O ) Marine Brass Socket 24-500V 10/16A 1/2/3P+E CZH109 ( O-) Marine Brass Socket 24-500V 10/16A 1/2/3P+E CZH201 (-O-) Marine Brass Socket 24-500V 10/16A ...

LIFT FOR DISABLED PEOPLE - Structural steel: S 275 JR - Characteristic yield strength: fyk =275 N/mm2 - Characteristic tensile strength: ftk = 430 N/mm2 - Modulus of elasticity: E= 2.10x105 N/mm2 - Poisson's coefficient n = 0.3 - ...

FLOTATION MODULES We supply extra thick floating docks (minimum thickness 30 mm), made of Pozzolanic concrete S4-S5 to 500 kg/m3 of cement, fibre reinforced and strengthened armed 16 mm rods in the bottom perimeter, with interposed shaped ...