Hydraulic equipment for boats

Height: 185 mm
Width: 340 mm
Length: 397, 280 mm

The Grey Water Tank is designed to be used as a collection tank for waste water from showers, sinks, dishwashing machines, etc. The tank includes an Ultima Switch for automatic operation and is easy to connect to any 12V/24V pump up to ...

Capacity: 55 l - 2,000 l

NAUTA® flexible portable tanks are a remarkable improvment over the traditional painted metal tanks. Perhaps the most noticeable change : they do not live rust rings on the floorboards or cockpit sole. These roll-up when empty tanks ...

Capacity: 55 l - 150 l

The technique of storing and transporting liquids through the use of flexible tanks has many advantages : • Lightness • Handiness • Adaptability • Fiability NAUTA® Flexible Tanks provide many advantages over rigid tanks ...

Fuel tank Made from stainless steel AISI 304. Every tank is subject to the full automated pickling Water tank Made from stainless steel AISI 316L. Water tanks are protected inside with a special treatment that preserves the stainless ...

Flow rate: 500 m³/h - 3,160 m³/h
Pressure: 310 bar - 360 bar
Weight: 750, 3,000, 5,200, 1,200, 2,175 kg

The dredging head is a high efficient and modular heavy-duty submersible dredge pump unit. This pump unit has several dredging tools and connectors to adapt to every situation and environment. The dredging head is ideal for small-scale ...

Capacity: 30 l
Height: 32 cm
Width: 25 cm

In compliance with ISO 8099. Rigid tank for black water in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations Download Manual Download

Capacity: 57 l
Height: 30 cm
Width: 35 cm

In compliance with ISO 8099. Rigid tank for black water in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations Download Manual Download

Capacity: 83 l
Height: 32 cm
Width: 40 cm

In compliance with ISO 8099. Rigid tank for black water in cross-linked polymer. It is equipped with all accessories and an electronic level sensor. Available in different configurations

Flow rate: 120, 230 l/min
Pressure: 6 bar
Weight: 7.2, 11.4 kg

Bidirectional self-priming pumps with side liquid ring, widely used in the nautical sector to empty bilges, fire-fighting, washing of decks and chains and transfer liquids such as: fresh water, sea water, gas-oil etc. Available with ...

Flow rate: 500 l/min
Pressure: 6 bar
Weight: 25.5 kg

Bidirectional self-priming pumps with side liquid ring, widely used in the nautical sector to empty bilges, fire-fighting, washing of decks and chains and transfer liquids such as: fresh water, sea water, gas-oil etc. Available with ...

Capacity: 2 l - 500 l

Capacity: 75 l
Height: 300 mm
Width: 380 mm

marine Water Tank with Wheels for Camping 75 L Grey, Water Containers Collapsible Water Can Tank Water Canister Water Bag for Emergency

Capacity: 25 l
Height: 325 mm
Width: 260 mm

Portable pure water tank Transport 2 Wheeler Water Roll Tank Best water tanks for motorhomes and campervans and marine Two Caps 1x M44 + 1x M85 or D96 Carton size 27x33x54CM

Capacity: 40 l
Height: 230 mm
Width: 370 mm

40L Wheel Water Tank Portable Outdoor Caravan Camping Motorhome Container 40L Portable Wheel Water Tank Camping Caravan Storage

Pressure: 65 bar

Number of pistons - 5 Capacity - 23 cm3/rev. Standard equipment Operation manual, taper key and decorative nut to fit the steering wheel. Description The pump HP 05 pump is an axial piston pump with 5 pistons. The rotor of the ...

Pressure: 55 bar

Number of pistons - 5 Nominal maximum pressure - 55 bar/5393 kPa Standard equipment Operation manual, taper key and decorative nut to fit the steering wheel. Description The HP 05 OB pump is an axial piston pump with 5 pistons. ...

Pressure: 60 bar

Number of pistons - 7 Capacity - 60 cm3/rev. Standard equipment Dual non-return valve No 12, taper key and decorative nut to fit the steering wheel, operation manual. Description The HP 07 pump is an axial piston pump with ...

Capacity: 8 l

Pressure tank in the constant pressure water supply system to play a constant role in the pressure to prevent the system pressure fluctuated to reduce the frequent start of the pump can also be used to absorb the system due to valves, ...

Marco has over 50 years of experience in the design and manufacture of complete hydraulic power units, from the hydraulic tank to the motor pump groups. Marco can provide customers with customized hydraulic power units driven by either ...

Capacity: 5 l - 100 l
Height: 85, 97 cm
Width: 200, 500 cm

The floating recovered oil storage tank is a towable floating oil/water storage tank with a hull shaped storage pocket. The tank/ barge is manufactured from neoprene coated fabric, which is strong, durable and lightweight. The superstructure ...

High quality Steel 100 litre reservoir protected by High Gloss 2-pack polyurethane for maximum corrosion resistance. DUAL 380/415VAC Heavy Duty motor and pump assembly. In built relief valve. Sight level gauge. Filler breather. Pressure ...

HyDrive ENGINE-DRIVEN Power Packs are supplied as complete modules and the basic Pack-7 Model includes the following standard features: Cast Aluminium 25 litre reservoir. Fully Chromate converted and coated in 2- pack polyurethane for ...

5000 SERIES DC Power Packs come in a range of sizes and types to suit most constant duty cycle operation. Because of the variety of steering and control tasks these units are required to do, each system is tailored to suit each application ...

SWL 3,000 lbs. (1360 kgs) per jack Powered by hydraulic jacks for smooth and easy operation Complete system utilizes four jacks Adjustable base and arm Safety pins for added protection No-flat 10” tires and hand grip for easy mobility Lifting ...

• Strongest and most versatile lift available • Powered by hydraulic jacks for smooth and easy operation • Safety Pins for added protection • No-flat tires and hand grip for easy mobility • Adjustable base and arm with two arm positions • ...

• Air over hydraulic operation allows one person to operate four lifts simultaneously with a standard (not included) manifold. • 25’ Air Hose Included • Recommended air supply 120 PSI with minimum 20-gallon storage tank. • Strongest ...

Capacity: 49, 32 l
Height: 600, 400 mm
Width: 260 mm

Polyethylene tank already assembled with fresh water pump type 16.503.12. Recommended for one outlet. When rotated at 90°, it height varies from 34 to 26 cm according to your needs.

The RPU300 is a reversible hydraulic steering pump for boats up to 70ft. It works in conjunction with the NAC-3 / AC42 autopilot computer as part of an autopilot system. Key Features Reversible Pump High Flow Rate 12V DC 290-960 cc

Flow rate: 15 l/min - 45 l/min
Weight: 8.2, 11.3, 9.5 kg
Height: 19, 41, 27 cm

Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm ...

The hydraulic pump is a mechanical device thatgenerates an oil flow rate upon rotating (according to its displacement and operating RPMs) at a specified pressure. Internally, they consist of 5 or 7 pistons that upon turning create a difference ...

Capacity: 100 l

Grey Waste 100 Ltr Shower & Sink System Robust compact tanks with multi-port options to suit your installation Whale’s Largest Multi-Port Grey Waste Tank Ever! Simple system - Allows you to manage all grey waste on board through ...

Diesel and electrically driven multipurpose power packs DESMI offers a very comprehensive range, 3-219W, of diesel and electrically driven multipurpose power packs / hydraulic power units for operating oil spill control equipment such ...

Capacity: 33, 50, 65, 80 l

Craftsman Marine tanks are all made of the synthetic material LDPE, which makes them extremely strong and virtually indestructible. Because of the excellent insulating properties, condensation in the tank is much less than any metal ...

The compact powerpacks can run the stabilizer from the generator power at all times, and even have a standard built-in valve control of a loadsense engine fitted pump to enable cruising operation of the stabilizers without a generator ...

A pneumatic pressure charge matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, ...

The Mavi Deniz engine driven Hydraulic Power Pack designed to convert a primary drive source into a hydraulic fluid flow for supplying the hydraulic power required to use the boom reels, winches, skimmers, pumps and capable of powering ...

The Lamor Power Pack LPP 6 C75 is used as a suction pump and a power source for Lamor skimmers and smaller hydraulically operated equipment. The Power pack represents a light-weight, easily portable power solution for hydraulic equipment ...

A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength ...