Diver recovery diving harness MKII

It is important to differentiate between certified lifting points and lightweight tool attachment points and the special profile-cut ‘D’ rings make no doubt which to use, and assist the diver in poor visibility or stressed conditions. The Umbilical connection point is also load tested, but is adjustable as to its position, which allows divers of different sizes to slide it into position and lock it in the most suitable place – another bit of diver feedback, and how to do it is a great idea from our design team. TESTING Very few diver recovery harnesses have ever been tested to ensure that they actually support the diver when he needs it. C-Tecnics have developed a rigorous test protocol and procedure when designing the Mk1 harness and continue this striving for the best with the MKII. The Jok II harness was tested at 900Kg/N with no failure of stitching or webbing, in line with the requirements of harmonised standard BS EN15333:2008. The special profile cut ‘D’ rings were selected to overcome any doubts which may occur when using normal welded ‘D’ rings for lifting purposes as we uncovered that the manufacturers of these traditional items would not load certify them as they could not guarantee the weld quality. Dynamic loading was potentially an issue if a diver were to fall when being recovered, or exiting, from the water or indeed if the diver was to be effected by swell or waves at the point of surface recovery. The routing of the webbing had to be changed from some of the early design of one piece ‘wrap round’ webbing as it simply wouldn’t take the strain in testing – we have proven that many other designs are simply inadequate…