The Hawk is a high-speed, precision cutting system with a multi-functional tool head. It is a modern solution specific to professionals working in the advanced printing, packaging and graphics sector as well as industrial applications like gaskets, foam and insulation which require special cutting applications.
Eastman’s Hawk offers high-speed, precision cutting, impressing with its functional design and concentration on the basic essentials: • Freely accessible work surface from all sides • Extremely robust traverse bridge with minimal protruding at the sides and rack and pinion drive system in all axis for slip-free drive. • Powerful AC-servo motors and modern CAN-Bus-steering technique enable high throughput
System Sizes
Contact the factory for additional information.
Material clearance thickness
max. 1.8 inches depending on the tool head and protective underlay
Static repeatability
± 0.02 mm/m @ 20deg C (0.008 inch @ 68deg F)
Electric - control power / PC
200-210V, 3ph, 50/60Hz, 2.6kVA
Max. cutting speed
45 in/sec (Depending on the cutter size, cutter configuration and tool head)
Max. acceleration
1.15G (Depending on the cutter size, cutter configuration and tool head)
Electric - Vacuum Blower
208/230/380/460/575V, 50/60 Hz, 8.5 HP, VFD control
Operating temperature
+10 deg C up to +30degC (50F up to 86F)
Relative humidity
40-80% non-condensing
maximum Acceleration
1.0 g
Disclaimer
Achievable speeds and accelerations are tool-, material- and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.