Economical Low temperature curing (70°C) with long shelf life.
SA 75-90 adhesive film is a toughened film unsupported or on a glass carrier with excellent tack and drape characteristics.
It offers many advantages over traditional wet lay-up techniques for bonding
of composite skins to cores, including; consistent bond-line thickness and
weight, high strain to failure, high toughness, handling convenience,
controlled flow and an 8 week out-life at ambient temperature (18-22ºC/64-
72ºF). SA75-90 has a flexible cure envelope of 70ºC (158ºF) to 120°C
(248ºF).
¬ Designed for bonding prepreg skins to honeycomb and most core types
¬ Compatible with all Gurit Prepreg & SPRINT products
¬ Toughened for impact resistance and peel strength
¬ Controlled flow for maximum bond integrity
PREPARATION
When preparing the lay-up the film should be removed from
the freezer and allowed to thaw in a sealed bag. This may take
6 to 24 hours depending on roll size. This prevents
atmospheric moisture from condensing on the film which may
cause voiding on cure.
SECONDARY BONDING & MULTI-STAGE
LAMINATING
SA75-90 is ideally suited to improve the bond when laying up
prepreg onto pre-cured surfaces. The precured surface must
be suitably abraded and cleaned or peel plied before
application of 100-200g SA75-90. The adhesive film should be
vacuum de-bulked into position to ensure no air is trapped
beneath. Subsequent laminates can then be applied as
normal.
CORE BONDING
SA75-90 is ideally suited for core bonding applications.
Recommended for use with Gurit Corecell®
.