Electromagnetic clutch MMC

Advantages of use: » Electrically remotely actuated. » Reduced power consumption from engine. » Extended pump life. » Lower operator cost. » Simple installation. » Operator convenience/safety. » Cold weather starting. General description of electromagnetic clutches These are flange mounted, normally a two piece construction clutch typically mounted directly on to the pump. Solid forged rotor. A one piece solid forged rotor means no chance of internal parts separation. The rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque. Different coil voltages available. Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made. ‍ MMC electromagnetic clutch series for marine & hydraulic pump applications MMC series electromagnetic clutches are designed for use with hydraulic pumps, many of which are used in marine winch drives. Typically flange or plate mounted, they engage and disengage the pump. ‍ » Torque ratings from 271 to 2033 Nm (200 to 1500 lb-ft) . » Solid forged rotor & pulley or hub. » Direct drive or pulley drive. » 12 & 24 VDC available.» "TC" and "B" type pump mounts. » Straight or splined bore. » High temp, long life grease. » Bi-directional operation. » One piece design. » Plated for corrosion protection. » High temperature epoxy coil.