Electric windlass RX series

for boatshorizontalabove deck

The RX2000 offers a maximum pull of 1175kg, 2500lbs, offering great performance and value for the 30ft to 48ft market range. 4 gypsy options to choose from 6/7mm1/4’’, 8mm 5/16”, 10mm DIN & 10mm ISO Lewmar is launching the new VX range of windlasses In two kit packs RX Standard windlass kit includes Deck unit, Motor gearbox, Solenoid and Gypsy RX Extended windlass kit includes Deck unit, Motor gearbox, Solenoid, Rocker switch, Cuircit Breaker and Gypsy Installation of this product should meet the régulations and standards or codes of practice relevant to the craft to which it is being fitted. As a minimum the installer should conform ISO 10133. Lewmar recommends the installer use cable with insulation rated at 90°C or higher. Length = Length of cable from battery V terminal and back to battery terminal including breaker and switch gear if fitted Cable size guide given is for guidance only. It is the responsibility of the installer to confirm the capacity and voltage drop for the installation. If in any doubt, contact your local marine electrician. Plan the installation to suit the Controls and give the operator a full view of the windlass. The wiring System should be of the fully insulated type, which avoids possible electrolytic corrosion problems. We recommend the use of type III stranded, tinned copper wire with copper crimp terminais. Most modem installations are négative retum (négative ground) but polarity should be checked. Overload protection, in the form of the circuit breaker/fuse supplied, must be built into the windlass wiring circuit.