Adhesive tape Bantape®3025 R/CW

Bantape®3025 R/CW nominal 30 micron (1.2 mil) high tensile strength aluminum foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easy-release silicone release paper. The workable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces.Bantape® 3025 R/CW excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions. TYPICAL APPLICATIONS HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors. PRODUCT USE It is essential that the user evaluate the Bantape®3025 R/CW product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on Bantape® 3025 R/CW products between +10 ~ +40°C (+50 ~ +105 °F). Surface Preparation It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants. Storage & Self Life 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.