Inboard engine N13.510 CR2

dieselboatingprofessional vessel

ENGINE BLOCK „ Replaceable wet-type cylinder liners „ 4 Valves per cylinder „ Watercooled exhaust manifold FUEL SYSTEM „ Electronically controlled unit injectors „ Primary & secondary fuel filter LUBRICATION SystEm „ Replaceable full-flow oil filter „ Oil dipstick „ Oil cooler COOLING SYSTEM „ Closed cooling with heat exchanger „ Gear driven self-priming raw water pump „ Coolant circulating pump „ Water cooled exhaust elbow ELECTRICAL SystEm & Instrumentation „ 24V / 100A alternator „ 24V starter motor „ Complete instrumentation including key switch and alarms „ Extension cable harness with plug-andplay AIR INTAKE „ Water cooled turbocharger „ Air-to-seawater aftercooler OTHER FEATURES „ Flywheel SAE 1 „ Flexible engine mounting „ Damper pulley OptionAL SYSTEMS & accessorIes „ Keel cooling adaptation „ Dry exhaust elbow „ Complete marine propulsion systems „ Marine transmission adaptation kits „ Throttle and shift controls „ Additional instrumentation, Flying bridge extension harness „ Rigid engine mounting „ Power take off „ Type approval RATINGS „ Up to 5000 annual operating hours „ Load factor up to 65% „ Full power for no more than 16 hours out of each 24 hours of operation. The remaining operation time must be at or below cruising speed TRANSMISSIONS „ Contact your Nanni representative for more details and availability about transmissions types and models range.