Protective cover TA42010000

for sailing dinghies420

- Fabric: strengthened polyester PVC, anti UV treated - Strap and clip for fast implementation - System of evacuation of rainy waters Nautisails cover, the ideal solution to protect the deck equipment against UV, action of the sea salt, sand and the bad weather in general. It is also the means to protect your material from thieves temptation. Cutting: We chose a cut not too tight to facilitate its placement. Adjustment is then made by sliding ties at the front and rear of the awning. Each cover is equipped with 4 tensioning straps to guarantee its resistance to the wind. Installation: The 420 cover has to be installed by the front of the boat. Fix the boom on the mat and stretch the kicking strap IMPORTANT: The boom must rest at the bottom of the boat. Install the drain handle. Attach the awning using the 4 straps under the boat and the side straps. Adjust with the front and back links. Materials: We use a high-strength fabric water repellent 900 denier polyester, UV treated. We use a larger diameter wire with zigzag seam 6 points. Color: Light gray has been chosen to minimize discoloration due to UV, weather and aging. We have created and patented an innovative system of evacuation of water: the "Waterhole". The water that accumulates on the cover at the back of the boat is evacuated through a grid connected to a water stick that passes through the aft hatch of the boat.