Diesel heater 66M

for boatsfor yachts

Most stoves are also available in copper or brass. Type 66M The small stove with the efficiency. Specially suitable for smaller pilot houses and smaller yachts, and is suitable for caravans too. When the REFLEKS oil stoves has to be mounted in the pilothouse or at a place where pressure differences may occur – either from the motor or by wind influence, e.g. open doors – the mounting has to be done as shown. Type 66MW Manufactured in polished stainless steel, copper or brass, with built-in regulator. The 66MW is a further development of the popular oil stoves 66M and 66MK. This model is designed for mounting on the bulkhead, and includes air space insulation for direct mounting. The stove is very compact with a high output which can heat up to 20 m3 in an insulated vessel. The 66MW has an air intake fitting in the base. This can be used: – Either: – To draw in fresh air from outside the vessel. Or: – If fitted with approximately one metre of pipe down to floor level, it will use this cooler air and give a more consistent heat around the whole cabin. Adequate ventilation to the cabin would be necessary). The type 66MW is the reliable and economic heater for all vessel owners that appreciate stability and safety at sea. Refo is an effective cast iron stove that radiates quality and solidity. The stove is made as a land stove or as a marine stove. Refo is delivered with short legs or long legs, and you have the possibility to choose between top- or back connection for the chimney. A large glass door makes it possible to follow the flames from the clean and soot free combustion. Refo is delivered in matt black paint.