Epoxy coating 4010

solvent-free

Resoltech 4010 / 4013-4015 is a solvent-free epoxy system dedicated to clear or pigmented self-leveling floorings. It may be used in industry as well as in houses in a thinner layer. For industrial floorings, it is recommended to apply a first thick coat (between 2 and 4 mm) filled with mineral fillers, it will strengthen the floor for the heavy handling vehicles. Then a second pigmented and thin layer should be applied, this finish coat is sufficient for home floorings. There is a wide range of pigments available, please refer to the list at the end of the datasheet. Resoltech 4010 / 4013-4015 shows many advantages compared to other flooring systems : Easy to use, self-leveling, and good adhesion to many substrates with 1010 /1014 primer Long service life and good chemical resistances (greases, alcohols, hydrolysis..) Shiny and easy to clean (no joints) Good thermal and phonic insulation No need to repair defects of the substrate (lower than 0.5mm) FEATURES Mix viscosity (mPa.s) 400 - 500 Mix density 1.08 Gel time on 70 mL, 4cm at 23°C 1h - 5h30m