Boat receiver

GPS

The Veethree GPS Receiver is the most accurate solution for converting an existing electrical speedometer into a GPS speedometer. Standard GPS with 1-second (1Hz) update rate that outputs NMEA 0183 info. Fast update GPS with 1/10-second (10Hz) update that outputs NMEA 0183 info. Fast update GPS with a 1/10- second (10Hz) update that outputs 8- or 16-pulse signal to drive existing electrical speedos on the market. HIGHLIGHTS •1Hz unit outputs NMEA0183 data at 4800 baud, 8 data bits,1 stop bit, no parity (NMEA 0183 standard). •10Hz unit outputs same NMEA messages at 38,400 baud. • Receiver output is a differential signal to meet NMEA 0183 specs. [The input on the speedo head is an opto-coupled NMEA0183 differential input]. • Operating voltage is 10-32V DC; unit typically consumes <50mA at 12V. •Operating temperature -30 to +85°C,storage -40 to +125°C. •Cold/warm/hot start times are <35/<34/<1 seconds. •66 channels for acquisition, 22 for simultaneous tracking. •Position accuracy is“<3m CEP (50%) without SA (horizontal)” or“3.0m 2D RMS”. • Velocity accuracy is“0.1m/s without aid”. •The default NMEA output messages are GGA, GSA, RMC, VTG, and GSV •For 8/16 pulse unit only: The pulse output is a square wave, low voltage should be <0.5V, high voltage will be (supply0.5)V.