Boat AIS A150 easyTRX2S-IS-IGPS

Class B receiver

The ClassB unit easyTRX2S receives AIS ClassA and ClassB signals and transmits own data according to ClassB standard. Function All devices of the easyTRX2S series are performing with a lot of usefull features: By means of USB port connection to PC or Laptop is possible. With contained software it can be choosen between 38400 or 4800 Baud data rate. Function activity is shown by 8 LED’s. The easyTRX2S is able to interpret incomming AIS data for CPA alert or AIS S.A.R.T. ermergency messages. Additional the easyTRX2S devices can be used as power surce for external alerting devices. All received and transmitted AIS data can be stored with internal SD Card recorder. With the build-in multiplexer input 3 devices with different baud rate can be pluged to the easyTRX2S units. At least the external cable harness gives the possibility for outsourcing functionaly like "change into silent mode " or "PAN PAN emergency call" by switch. The integrated VHF antenna splitter enables to use an existing VHF for AIS and HF radio at the same time. Before the incoming signals are separated, the built-in pre-amplifier increases the signal strenght to avoid phisical loss. The integrated GPS antenna is the new part of this AIS transceiver unit. This reduces the need of an external GPS antenna mounted on deck if the easyTRX2-iGPS is going to be used in Polyester boats. For stainless steel vessels this unit is not useful. Here you have to connect a separate GPS antenna to the unit. The easyTRX2S units with the appendix IGPS contain a integrated GPS antenna with 50 chanel receiver. These units are designed for the use on polyesther boats because there is no GPS interference.